Metallurgical High Vacuum Corporation

Model 212-J14 Microvac Pump

Product Parts

  • Pump housing
    1
  • LOWER BRACKET, BELT GUARD
    2
  • Core hole plug
    2
  • Reducing bushing
    3
  • Dowel pin
    4
  • Plug
    5
  • Plug
    6
  • Plug
    7
  • Plug
    8
  • Elbow
    9
  • Ball valve
    10
  • Valve plate gasket
    11
  • Valve assembly
    12
  • Screw
    13
  • Oil baffle
    14
  • Screw
    15
  • Lock washer
    16
  • Gasket
    17
  • Oil reservoir
    18
  • Oil reservoir
    18
  • O-ring
    19
  • Lock washer
    21
  • Lifting eye bolt
    22
  • Hex nut
    23
  • Plug
    24
  • Hinge block
    25
  • Screw
    26
  • Lock washer
    27
  • Motor platform
    28
  • Screw
    29
  • Spherical washer
    30
  • Hex nut
    31
  • Screw
    32
  • Lock washer
    33
  • Oil reservoir cover
    34
  • O-ring
    35
  • O-ring
    36
  • Lens
    37
  • Lens
    37
  • Lens retainer
    38
  • Window assembly
    38A
  • Screw
    39
  • Screw
    40
  • Lock washer
    41
  • Side cover; dead end (end plate)
    42
  • O-ring
    43
  • Plug
    44
  • O-ring
    45
  • Spherical roller bearing
    46
  • Ball bearing
    46
  • Bearing nut
    47
  • Bearing lock washer
    48
  • Screw
    49
  • Screw
    50
  • Standoff
    51
  • Side cover; drive end
    52
  • Check valve
    53
  • Screen wire
    54
  • O-ring
    56
  • Seal washer
    57
  • O-ring
    58
  • Plug
    59
  • Plug
    60
  • O-ring
    61
  • Seal carrier
    62
  • Screw
    63
  • Lock washer
    64
  • O-ring
    65
  • Motor
    66
  • Sheave
    67
  • V-belt
    68
  • Mechanical seal
    69
  • Mechanical seal
    69
  • Piston-slide
    70
  • Eccentric
    71
  • Plug
    72
  • Hinge bar
    73
  • Shaft
    74
  • Shoulder ring; non-drive end
    75
  • Flywheel with bushing
    76
  • Pulley with bushing
    77
  • Woodruff key
    78
  • Bearing shim; laminated
    79
  • Shoulder ring; drive end
    80
  • Key
    81
  • Oil manifold block
    82
  • Plug
    83
  • Screw
    84
  • Paddle wheel
    86
  • Axle
    87
  • Lens
    88
  • Lens
    88
  • Solenoid valve
    90
  • Screw
    91
  • O-ring
    92
  • Screw
    93
  • Stem
    94
  • M10 x 45 mm long SHCS plain finish (socket head cap screw)
    95
  • Gas ballast valve
    97
  • Screw
    98
  • Dowel pin
    110
  • Screw
    111
  • Elbow
  • MOTOR PLATFORM
  • Elbow
  • Water miser
  • Flywheel guard assembly
  • Flywheel guard assembly
  • Belt guard assembly
  • Belt guard assembly
  • Spacer
  • Minor kit with poppets